New Cisco air-LAP1310G -A-K9 Wirless Access Point

Description

The Cisco New Never open Box  Aironet 1300 Series Outdoor Access Point/Bridge is available in autonomous and lightweight products. The autonomous product can support standalone network configurations with all configuration settings maintained within the unit. The autonomous product can be configured for multiple operating roles such as, access point, bridge, and workgroup bridge. The lightweight product operates in conjunction with a Cisco wireless LAN controller with all configuration information maintained within the controller. The lightweight product can be only configured as an access point.
Product Terminology
The following terms refer to the autonomous and lightweight products:
•
The term
access point/bridge
describes both autonomous and lightweight products.
•
The term
autonomous access point/bridge
describes only the autonomous product.
•
The term
lightweight access point
describs only the lightweight product.
•
The term
access point
describes the product when configured to operate as an access point.
•
The term
bridge
describes the product when configured to operate as a bridge.
Autonomous Access Point/Bridge
The autonomous access point/bridge (model:
AIR-BR1310G
) supports a management system based on Cisco IOS software. The access point/bridge is a Wi-Fi certified, wireless LAN transceiver. The autonomous access point/bridge uses a single mini-PCI radio (IEEE 802.11b-compliant or IEEE 802.11g-compliant) that can be upgraded to future radio technologies.
The autonomous access point/bridge serves as the connection point between wireless and wired networks or as the center point of a stand-alone wireless network. In large installations, wireless users within radio range of an access point can roam throughout a facility while maintaining uninterrupted access to the network.
You can configure and monitor the autonomous access point/bridge using the command-line interface (CLI), the browser-based management system, or Simple Network Management Protocol (SNMP).
Lightweight Access Point
The lightweight access point (model:
AIR-LAP1310G
) is part of the Cisco Integrated Wireless Network Solution and requires no manual configuration before they are mounted. The lightweight access point is automatically configured by a Cisco wreless LAN controller (hereafter called a
controller
) using the Lightweight Access Point Protocol (LWAPP).
Features:
- Data rates of 54 Mbps in the 2.4 GHz band
- Range of 20 miles (32 kilometers [km]) at 11 Mbps
- Aggregate throughputs approaching 28 Mbps
- Maximum transmit power of 50 milliwatts (mW) for 802.11b and 30 mW for 802.11g
- For vehicle installed deployments, over 100 km per hour speeds at 12 and 24 Mbps with 128 byte packets at 1 percent Packet Error Rate (PER)
- Support for antenna diversity